Breather and Bleeder

WF150 - Polyester Breather - 150g/m² - 205°C

This polyester breather allows to breath air out from the vacuum bag and bleed excess of resin.
It is suitable for using from low to medium temperature.

  • Colour: White
  • Width: 1.52m
  • Weight: 150 g/m²
  • Maximum temperature: 205°C

Download the WF150 Technical Data Sheet

WF10 - Polyester Breather - 330g/m² - 205°C

This polyester breather allows to breath air out from the vacuum bag and bleed excess of resin. It is suitable for using from low to medium temperature.

  • Colour: White
  • Width: 1.52m
  • Weight: 150 g/m²
  • Maximum temperature: 205°C

Download the WF10 Technical Data Sheet

WF300N - Nylon/Polyester Breather - 330g/m² - 232°C

This Nylon breather has good air permeability at high temperature and high pressure. Recommended being used in cure process below 232 ℃, especially with the prepreg in autoclave.

  • Colour: White
  • Width: 1.52m
  • Weight: 3o0 g/m²
  • Maximum temperature: 232°C

Download the WF300N Technical Data Sheet