Breathers and Bleeders
Breathers & Bleeders allows to apply a uniform pressure, remove the air and volatiles during the polymerisation and retrieve the resin that went through the release film hoses.
WF150 - Polyester Breather - 150g/m² - 205°C
This polyester breather allows to breath air out from the vacuum bag and bleed excess of resin.
It 
is suitable for using from low to medium temperature.
- Colour: White
- Width: 1.52m
- Weight: 150 g/m²
- Maximum temperature: 205°C
WF10 - Polyester Breather - 330g/m² - 205°C
This polyester breather allows to breath air out from the vacuum bag and bleed excess of resin. It is suitable for using from low to medium temperature.
- Colour: White
- Width: 1.52m
- Weight: 150 g/m²
- Maximum temperature: 205°C
WF300N - Nylon/Polyester Breather - 330g/m² - 232°C
This Nylon breather has good air permeability at high temperature and high pressure. Recommended being used in cure process below 232 ℃, especially with the prepreg in autoclave.
- Colour: White
- Width: 1.52m
- Weight: 3o0 g/m²
- Maximum temperature: 232°C